background image

Contents 
 GENERAL SAFETY INSTRUCTIONS 

 
1.  Product descriptions 
2.  Features 
3.  Configuration 
4.  Connector pin assignment 
5.  Rear panel fixture 
6.  Connection 
7.  Control of inner selection switch 
8.  How to set up the camera 
9.  Specifications 
10. How to mount the camera 
11. Caution:Operation under heavy vibration 
12. Attached drawings : Ex-view of CS5260D/DP 
13. Maintenance 
 
 

BEFORE USING THE CAMERA - GENERAL SAFETY  
INSTRUCTIONS

  

This instruction manual contains important information for the operator(user) and/or people around  
him/her to avoid personal injuries, or property damages against him/her or people around him/her by  
using your purchase correctly. Prior to use, read this operation manual carefully to fully understand  
its instructions for correct use. 
 

 

[Definition of markings]

  

The meaning of each mark used in this instruction manual is given below

 

DANGER 

This mark warns the user that improper use, indicated with 
this 
mark, may cause death or severe personal injuries against the 
user or people around him/her. 

 

CAUTION 

This mark warns the user that improper tree, indicated with 
this 
mark, may cause personal injuries (*1) or material damages 
(*2) against the user or he around him/her. 

Notes 
*1 : Personal injuries mean wound, burns, electric shocks, and others for which the person  
injured need not to be hospitalized nor to be cared for the long term.  
*2 : Material damages mean any direct or consecutive damages related to property or material loss. 
 

 

Содержание CS5260D

















Отзывы: