Telguard TG-7FP Installation & Operating Guide
i
56052401 Rev A
Important Note
The registration form must be completed before leaving for the job site to install the Telguard
product. Use our dealer site at
to register the communicator in real time.
Foreword
Dealers purchase Telguard
cellular communicators for the quality, features and total value they
represent. The Telguard TG-7FP meets UL and ULC standards for Commercial Fire and
Commercial Burglary systems. The Telguard TG-7FP may be used in Commercial Fire, Commercial
Burglary, or combination Fire/Burg systems as the sole communication path, when applicable
features are enabled.
Technical Support
Technical support for all Telguard products is available:
Toll Free: 800-229-2326, option 9
Monday - Saturday 8am - 8pm ET
About this Manual
This manual assumes that you have basic security system installation skills such as measuring
voltages, stripping wire, properly connecting wires together, connecting wires to terminals, and
checking phone lines. It also assumes that you have a familiarity with the proper installation and
programming tasks related to various alarm panels.
The material and instructions covered in this manual have been carefully checked for accuracy
and are presumed to be reliable. However, Telguard assumes no responsibility for inaccuracies
and reserves the right to modify and revise this manual without notice.
It is our goal at Telguard to always supply accurate and reliable information. To report a
discrepancy you find in this documentation, please send an email message to:
Or, write to:
Telguard Technical Services
3225 Cumberland Blvd
Suite 300
Atlanta, GA USA 30339
