
9
Telexper International Inc.
3F-3, No.2, Chien Pa Rd., Chung Ho City,
Taipei 235, Taiwan, R.O.C.
Tel: 886-2-6620-5898 Fax: 886-2-6620-6909
E-mail: [email protected]
http://www.telexper.com ISO 9001:2000
A member of VisionSoft
Chapter 3
Installation and Setup
I
NSTALLATION
F
LOW
C
HART
Prepare a hard disk (HDD),
Maxtor 80/120/160/250GB is recommended
FAT32 Format
recording?
Prepare a FAT32-format HDD
Refer to Chapter8 - SOP how to make a FAT32 HDD
Install the HDD inside the caddy
Set the 75-ohm dipswitch setting for each channel.
Connect cameras to DVR
Connect the power cable to City Power Source
(90~264Vac, 50/60Hz);
then power on
(Message shown as Fig 3.1 on the next page)
Hard disk scanning
FAT32-Format recording:
Takes around 8 min (80GB HDD) to build the file template (Message shown as Fig. 3.1)
Non-FAT32 recording:
Takes less than 5 seconds to build the file template (Message shown as Fig. 3.2)
End
DVR is working properly
Keypad Series: Message shown as Fig. 3.3
Mouse Series: Message shown as Fig 3.4
Parameter (OSD) setting
Insert caddy into HDD slot and lock the HDD
protection key
YES
NO