manualshive.com logo in svg

Telex TK-150 Series, Инструкция по применению

Поделиться
Скачать
Telex TK-150 Series Скачать руководство пользователя страница 19

Kenwood Radio Series

F.01U.321.735

19 

7.4.3 Options Configuration

The 

Options

 page is used to configure the various options supported by the radio 

type.

Freq Update w/PTT Check Box

If selected, the 

Freq Update w/PTT

 check box forces a channel change with each 

PTT.

NOTE:

Otherwise, channel changes occur only when the incoming channel is 
different than the previous channel.

Full Duplex Check Box

If selected, the 

Full Duplex

 check box allows full-duplex (simultaneous TX and RX 

transmission) audio.

NOTE:

COR settings can affect Full-Duplex operation. Trunked radio systems with 
go-ahead beeps typically require COR to be turned off.

Hi-Pass RX Check Box

If selected, the 

Hi-Pass RX

 check box enables a 300 Hz Hi-Pass filter for the RX 

audio. 

Monitor Enable Check Box

If selected, the 

Monitor Enable

 check box allows serial monitor commands to be 

sent to the radio.

Pre-Emphasize TX Check Box

If selected, the 

Pre-emphasize TX

 check box enables a 6dB octave pre-emphasis 

filter for the TX audio.

PTT Notch Filter Check Box

If selected, the 

PTT Notch Filter

 check box enables a PTT notch filter to filter the 

PTT frequency from the RX audio.

Содержание TK-150 Series























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды