Telex Stratus Heli-XT, Инструкция пользователя, Страница: 19 / 24

Operation 15
>
To turn the headset OFF, hold down the ON/OFF button until the LED
blinks rapidly, and then let go.
The blinking LED stops when the unit is OFF.
Accessory Muting
To mute accessories , do the following:
>
To either enable or mute the accessories, press the accessory mute button .
When the accessories are muted, the LED blinks at a slower rate than when
they are enabled.
Battery Charging
To charge the batteries , do the following:
>
Connect either the AC wall adapter or the aircraft cigarette lighter to the
DC input jack.
If the headset is OFF, the LED lights solid red during charging. If the unit is
ON and the batteries are charging, the LED will be mostly ON, but blink
OFF occasionally, as opposed to being mostly OFF but blinking ON
occasionally when the batteries are not charging.
Disable Auto Shut-Off
To disable the auto shut-off feature, do the following:
1.
Remove the batteries from the unit (see “Battery Installation” on page 13).
2.
Locate the DIP switch in the battery compartment.
3.
Using a small, flat-blade screwdriver, set switch position 3 to the ON
position (away from the number 3.
Auto Shut-Off can be re-enabled by setting switch 3 to the OFF position
(toward the number 3).