Operation
Channel Select (SS2000 Only)
Tap the Ch Select key to select channel 1 or 2. The key is green when channel 1 is se-
lected and red when channel two is selected.
Headset / Headphone / Speaker / Microphone Selection
●
To use a headset or telephone style handset, set the Speaker and Panel Mic keys
to off.
●
To use headphones with a panel microphone, set the Speaker key to off and set
the Panel Mic key to on.
●
To use the speaker with a handheld dynamic microphone, set the Speaker key to
on and set the Panel Mic key to off.
●
To use the speaker with a panel microphone, set the Speaker and Panel Mic keys
to on.
Receiving Calls
1.
When there is an incoming call signal the Call key will flash red. There will also be a
beep tone in the headphones or speaker if the beep feature is activated (page
9
).
☞
SS2000 only: incoming call indication is provided only for the currently selected
intercom channel.
2.
Turn on the Talk and Listen keys and begin your conversation. Turn the keys off
when finished.
☞
You can turn the talk and listen keys on in either momentary or latched mode.
For momentary operation, press and hold the key. For latched operation, tap the
key to turn it on. Then tap it again to turn it off when finished.
Calling an Intercom Channel
1.
SS2000 only: select the desired intercom channel.
2 2
Au d i o c o m ®
