Telex RadioCom BTR-700, Руководство по эксплуатации

Страница: 46 / 68

Talk But ton Latch on/Latch off
•
Press and hold [SET] then press the [TALK] but ton to
show the Talk But
ton Latch/Non-Latching screen. The
cur rent set ting of the fea ture is dis played on the LCD dis -
play.
•
While con tin u ing to hold [SET] press [TALK] again to
tog
gle the dis play from on to off or back. Re lease the
[SET] but ton to ac cept the cur rent dis played set ting and
re turn to the Group/Chan nel screen.
Spe cial Key Se quences
Lock out
•
Press [UP]+[DOWN] for 3 sec onds to lock or un lock the
beltpack. The words “Loc on” will be dis played when the
fea ture is ac ti vated, “Loc oFF” will be dis played when the
beltpack is un locked. Pressing [MENU] will still func tion
to view screens, but [SET] will no lon ger start any ed it -
ing. ClearScan™, First use, Fac tory de fault and talk but -
ton latch on/latch off are no lon ger ac ces si ble.
1
st
Use De fault
•
Press [MENU] while turn ing on the beltpack to en ter the
1
st
use de fault setup screen. This places the unit on group
01A with chan nel 01 flash ing.
Any user-programmed
fre quen cies that had been en tered pre vi ously are re -
tained.
The beltpacks must now be set to dif fer ent trans -
mit chan nels us ing the [UP]/[DOWN] but tons. Then
[SET] is hit to place the units on those chan nels. If lock -
out had been ac ti vated, the beltpack co mes up where it
was last left re
gard less of [MENU] be ing pressed on
power-up.
Fac tory De fault
•
Pressing all four but tons
[
MENU]+[SET]+[UP]+[DOWN]
at the same time for three sec onds places the unit on
group 01A with chan nel 01 flash ing, just like beltpack 1
st
use de fault, ex cept the all user-programmed fre quen cies
that had been en tered pre vi ously are erased.
Af ter the
but tons are re leased, it still may take sev eral sec onds for
the beltpack to re set. The beltpacks must now be set to
dif fer ent trans mit chan nels us ing the [UP]/[DOWN] but -
tons. Then [SET] is hit to place the units on those chan -
nels. If lock out had been ac ti vated, the beltpack co mes up
where it was last left re gard less of these four keys be ing
pressed.
6-18
l on
HOLD [SET] AND PRESS [TALK]
END
03A 01
GP CH
RELEASE [SET]
CONTINUE TO HOLD [SET]
AND PRESS [TALK] AGAIN
t
l oFF
t