Telex Echelon 100, Инструкция пользователя

Страница: 4 / 9

Page 3
OPERATION
Headband Pressure Adjustments
There are three pressure settings. Increasing the pressure will improve the seal
between the earcup and the head for greater noise reduction. To change the
pressure setting, remove the headset and fold the earcup inward as shown, then
rotate the adjustment knob to the desired setting. Repeat for both earcups. Both
sides of the headband should be set to the same pressure setting to keep the
headband properly centered on the head.
Boom Microphone Placement
1. Rotate the entire boom overhead to
wear the microphone on either the
right or left side of the head.
2. For best noise canceling, position the
microphone as close to the mouth
as possible and speak in a normal
voice. (See figure 3)
3. When the microphone is not in use,
it may be swung slightly away from
the mouth.
HIGH MEDIUM LOW
Figure 2
Figure 3