9
Head Pad Replacement
To
replace the head pad
, do the following:
1.
Unsnap the
old head pad
.
2.
Pry the
head pad
off the headband (it is held in place with adhesive).
3.
Peel off the
adhesive backing
on the new head pad.
4.
Attach the
new pad
to the headband.
IMPORTANT:
Make sure the overhead cord is inside the flaps of the head
pad.
5.
Snap the
flaps
closed.
Mic Element Removal
To
remove the mic element
, do the following:
1.
Press the
release catch
on the microphone element.
2.
Carefully pull out the
element
.
NOTE:
Avoid pulling on the microphone wires.
3.
Pull the
plastic connector housing
to unplug the microphone element.
FIGURE 7.
Mic Element Removal for Replacement
RELEASE CATCH
MIC ELEMENT
Содержание Air 3500
