TeleWell TW-EAV510 AC v2, Быстрый старт

Страница: 25 / 31

25
Network Configuration
Configuring a PC in Windows 7
Go to Start. Click on Control Panel. Then click on Network and Internet.
When the Network and Sharing Center window pops up, select and click on Change
adapter settings on the left window panel.
Select the Local Area Connection, and right click the icon to select Properties.
Select Internet Protocol Version 4 (TCP/IPv4) then click Properties
In the TCP/IPv4 properties window, select the Obtain an IP address automatically and
Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting.
Click OK again in the Local Area Connection Properties window to apply the new
configuration.
Factory Default Settings
Before configuring your router, you need to settings.
Web Interface:
User name: admin
Password: admin
If you have forgotten the username and/or password of the router, you can restore the
device to its default setting by pressing the Reset Button more than 5 seconds.
Device LAN IPv4 settings
IPv4 Address: 192.168.0.254
Subnet Mask: 255.255.255.0
WAN settings :
RFC 2684, LLC Bridge
DHCP server for IPv4
DHCP server is enabled
Start IP Address: 192.168.0.100
IP pool counts: 100