12
2.4 The Rear Ports
1
PWR
Connect the supplied power adapter to this jack.
2
RESET
After the router is powered on, press this recessed button using the end of
paper clip or other small pointed object to reset the modem
Recovery procedures:
Hold the
Emergency/Failure Recovery Button
on the back of the modem in.
Keep this button held in and turn on the modem. Once the lights on the
modem have stopped flashing, release the
Emergency/Failure Recovery
Button.
The modem's emergency-reflash web interface will then be
accessible via http://192.168.0.254/ where you can upload a firmware
image to restore the modem to a functional state. Please note that the
modem will only respond via its web interface at this address, and will not
respond to ping requests from your PC or to telnet connections.
3
LAN
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports
when connecting to a PC or an office/home network of 10Mbps or 100Mbps.
4
LINE / DSL
Connect the supplied RJ-11 (telephone) cable to this port when connecting
to the ADSL/telephone network.
5
WPS
Push WPS button to trigger Wi-Fi Protected Setup function
Port
Description
3
2
4
1
5
Содержание TW-EA514
