TeleWell TW-EA210, Руководство пользователя

Страница: 70 / 131

TW-EA210
5
2.3 The Rear Ports
LED Meaning
1 Power Switch
Power ON/OFF switch
2 PWR
Connect the supplied power adapter to this jack.
3 RESET
Press it to restore the factory default setting back.
4 VoIP
Connect RJ-11 cable to this port when connecting to an analog
phone set.
5
LAN
(RJ-45
connector)
Connect the supplied crossover cable to this port when connecting
to a NIC (Network Interface card) in PC.
Connect an UTP Ethernet cable to this port when connecting to a
LAN such as an office or home network.
6 USB
Connect the supplied USB cable to this port when connecting to the
PC.
7
LINE
(RJ-11
connector)
Connect the supplied RJ-11 cable to this port when connecting to
the ADSL
2.4 Cabling
Through USB Port
The product can be used as a Network Adapter on your PC. That means you do not have to install a
network adapter first on your PC before connecting the ADSL Modem/Router. Just connect the supplied
USB cable to the USB port of the ADSL Modem/Router and connect the other end to the PC.
Make sure that your ADSL Modem/Router and PC are turned on. On the front of the product is a bank of
LEDs. As a first check, please verify that the PWR, LAN LNK and ADSL SYS LEDs are lit.
So long as the cables are connected and the LEDs are lit normally, follow section “3.1 Installing the
USB Driver” below to setup this device.
Through Ethernet Port