High-Speed Wireless 32-bit PCI Card
Version: 1.1
Page 8 of 8
2 Install Drivers & Client Utility
This chapter describes how to install the drivers and client utility in Windows
98/ME/2000/XP.
2.1 Before You Begin
Before installing the new drivers into your PC, you need to remove all of the Wireless
LAN PC card drivers that you have installed.
During the installation, Windows 98/ME/2000/XP may need to copy systems files
from its installation CD. Therefore, you may need a copy of the Windows installation
CD at hand before installing the drivers. On many systems, instead of a CD, the
necessary installation files are archived on the hard disk in C:\WINDOWS
\OPTIONS\CABS directory.
2.2 Installing the PC Card Drivers
Follow the steps below in order to install the PCI card drivers:
1. Insert the CD-ROM that was provided to you in this package. The setup
should run automatically. If the setup does not run automatically, then you
must manually select the
setup.exe
file from the CD-ROM drive.
2. Once the setup begins you will see the
Install Shield Wizard
, as the image
depicts below.
