FIBERGLASS COLLINEAR ANTENNA 2.5 dBd
ANT900F2
880 - 960 MHz
The Telewave Collinear line of antennas are rugged omnidirectional antennas
suited for most environments, see the exact model specifications below.
These antennas are constructed with brass and copper elements that are
soldered together; producing both a DC path to ground and preventing
internally produced intermodulation products. Telewave’s PIM-Rated
antennas are carefully built using specially treated materials and a
meticulous assembly process to achieve a -150 dBc PIM rating or better.
The “Cool Blue” fiberglass radome provides maximum protection from
corrosive gases, ultraviolet radiation, icing, acid rain, and wind-blown abrasives.
Intrusion and water protection is equivalent to an IP24 rating.
When ordering, specify all TX and RX frequencies that will be used on the
antenna. Telewave’s support can assist with any special mounting needs.
Part Number
Connector Jumper
Clamp Kit
(Included)
Mounting
ANT900F2
N-F
24” RG213 M-M
ANTC485
Clamps Bottom (Normal)
ANT900F2-I
N-F
24” RG213 M-M
ANTC485
Clamps Top (Inverted)
ANT900F2-DIN
DIN-F
None
ANTC485
Clamps Bottom (Normal)
ANT900F2-IDIN
DIN-F
None
ANTC485
Clamps Top (Inverted)
ANT900F2-PIM
DIN-F
None
ANTC485
Clamps Bottom (Normal)
ANT900F2-IPIM
DIN-F
None
ANTC485
Clamps Top (Inverted)
ANT900F2-PIM-PIP
DIN-F
None
ANTC485
Clamps Bottom (Normal)
ANT900F2-IPIM-PIP
DIN-F
None
ANTC485
Clamps Top (Inverted)
Vertical Plane
Gain = 2.5 dBd
Antenna Patttern available on website
90
60
30
0
-30
-60
-90
-60
-30
0
30
60
-3
-10
-20
(Mast not included)
SPECIFICATIONS
Frequency (continuous)
880 - 960 MHz
Passive intermodulation rating*
-150 dBc or better
Gain
2.5 dBd
PIP rating**
25 KW
Power rating (Type.)
500 watts
Tower weight (a clamps)
8 lbs.
Impedance
50 ohms
Wind rating / with 0.5” ice
225 / 175 MPH
Input VSWR
1.5:1 or less
Maximum exposed area
0.9 ft.²
Pattern
Omnidirectional
Lateral thrust at 100 MPH
35 lbs.
Vertical beamwidth
38°
Shipping weight
10 lbs.
Coastal / Salt Air Suitable
No
Full antenna dimensions (L x D) in (cm)
38 x 2.75 (96.52 x 7)
Temperature range
-58 to +140 °F
-50 to +60 °C
Base pipe dimensions (L x D) in (cm)
Radome dimensions (L x D) in (cm)
11.5 x 2.75 (29.21 x 7)
26.5 x 2.5 (67.31 x 6.35)
* Specifications applicable only to PIM-Rated
Models
** Specifications applicable only to PIP-
Rated Models
Shipping dimensions (L X W X H) in (cm)
44 x 7 x 5
(111.76 x 17.78 x 12.7)
PIM/PIP Models Available
Part:ANT900F2-PIM,
PIM - Only
Part:ANT900F2-PIM-PIP, PIM + PIP
SERIES
Questions? Visit www.Talleycom.com or contact Talley at 800.949.7079 or [email protected] today.
