13
Step 2: Control the monitor with ID No.
Press “ID“ button, the screen will dispaly the“ ID NO.“, input 4
same digit on
“ ID “ and press “ENTER“ to confrim the input. Then
you can control the monitor.
For example:
When you setup the Monitor
“ID NO“ is “0001“, you press the
“ID“ button and input 0001 and press “ENTER“ to confirm the
input. You can control the monitor with ID No.0001 only. You are
not able to control other monitors unless you setup all monitors ID
No. is “0001“ or the“ ID „ setup function is on “Off“ status.
Notice !!!
Please don
’t setup the 4 digit No. as “0000“ , If you setup the
Monitor ID No. as
“0000“ , the ID function will be on “Off“ status.
7. OSD Setup
Picture (Video Mode)
1. Press the
“Menu” key on the buttons to call out the
OSD
Menu . Press
“
▲/+” or “▼/-“
to select
“Picture” mode and press “Menu” key again to select
the
“Picture” option.
2. Various picture settings are available from the
“Picture”
menu. Use
“
▲/+” or “▼/-“
to select item that you want
to adjust and press
“Menu” key again until grey bar
changes to blue color and press
“
▲/+” or “▼/-“
increase or decrease the figure that you wish . Press
“Exit” key to return to menu and confirm the setting.
Press two times of “Exit” to exit all the menu.
Brightness
Press
“
▲/+” or “▼/-“
to
increase/decrease the “Blue bar” to adjust brightness. Adjusting brightness to enhance
the level of dark area in the video picture such as night scenes and shadow scenes. Increasing brightness
will make dark areas more visible.
Contrast
Press
“
▲/+” or “▼/-“
to increase/decrease the “Blue bar” to adjust contrast. Increasing contrast will make
white area of the video picture brighter. Contrast works in conjunction with
“Brightness”.
Backlight
Press
“
▲/+” or “▼/-“
to increase/decrease the
“Blue bar” to adjust backlight. Increasing the figure will enhance
the backlight. Decreasing the figure will reduce backlight.
11
