EN
15
Join network
: Provides a GUI to connect to selected wireless network.
When device creates a new VAP for join to a network, by default creates a
new network named
WWAN
. WWAN network will be preconfigured as bridge
interface, name BR-WWAN, with only one physical interface, the new STA VAP
created to join to wireless network.
Replace wireless configuration
: When create new STA VAP, delete all VAPs
on Wi-Fi interface and only create new STA VAP.
Create/Assign Firewall zone
: for wwan network created.
If you need create a new STA VAP without scan and join, use Add button to
create new VAP with desired parameters: SSID, WPA key, etc...
Edit Wi-Fi interface settings
Click on Edit button to setup a VAP interface.
Device Configuration section configures Device Radio and configuration affects
to all vaps of Wi-Fi device.
Mode
: Select mode 802.11/a/b/g/n/ac of
Channel
: Set channel of Wi-Fi device. Auto let driver to choose best channel.
Width
: Bandwith of Wi-Fi channel 20/40/80 MHz.
Power
: Transmit power of Wi-Fi channel.
Interface Configuration section configure VAP parameters between three tabs.
VAP General Setup
ESSID
: The broadcasted SSID of the wireless network (for managed mode
the SSID of the network you’re connecting to)
Network
: choose network Wi-Fi VAP belong to or create a new network.
VAP Modes
Access Point
: VAP mode is AP. Wi-Fi device broadcast SSID and wait for
station connections.
Access Point (WDS)
: VAP mode is AP with WDS enabled. WDS enable
Ethernet over Wi-Fi, if VAP is member of a bridge network and need
propagate VAP traffic over LAN ethernet interface, choose this option.
Client
: VAP mode is STA and try to connect with best AP with same ESSID.
Client (WDS)
: VAP mode is STA and try to connect with best AP with
same ESSID. WDS enable Ethernet over Wi-Fi, if VAP is member of a bridge
network and need propagate VAP traffic over LAN ethernet interface,
choose this option.
VAP Wireless Security
