EN
15
If one or more channels fail, it is considered that
the dish check fails.
3.4.- Ports Logger (only for DCSS
devices)
This feature checks the four outputs of the switch.
The H30FLEX Sky will guide through the process
with messages that tell you what to do in each
step, as you can see in the image below:
When the process is finished, the result is shown
in the screen.
3.5.- Polarity Logger (only for
dSCR devices)
This features checks all the polarities of the satellite
channel plan.
The H30FLEX Sky will guide through the process
with messages that tell you what to do in each
step, as you can see in the image below:
When the process is finished, the result is shown
in the screen.
3.6.- Bands Check
This feature checks that all the SCR slots are
working propertly.
Below is a capture of the Bands Check window with
a brief explanation of its features.
When the scan is finished, the result of the scan is
shown in the screen:
Channel and
Frequency
Use
to
c
hange
Bar graph of power
measurement
Color according to
checkmarks
Band and Frequency
Use
to
change.
Long press
OK
to go to
Channel Info
Press OK to confirm
Bands Check
and go to the next step
Bar graph of power
measurement
Color according to
checkmarks
Result of
the scan
3.3.- SAT1 Logger
This feature is similar to the Dish Check one, but
in this case the device makes a scan in all the
channels of the plan.
Below is a capture of the SAT1 Logger window
with a brief explanation of its features.
When the scan is finished, the result of the scan is
shown in the screen:
Channel
and
Frequency
Use
to
change
Press Back to cancel
Bar graph of power
measurement
Color according to
checkmarks
Power and LKM
measurements
of the selected
channel with
pass/fail indicator
Scan
status
Channel and
Frequency
Use
to
hange
Long press
OK
to
go to Channel Info
Bar graph of power
measurement
Color according to
checkmarks
Power and LKM
measurements
of the selected
channel with
pass/fail indicator
Channel and
Frequency
Use
to
hange
Long press
OK
to
go to Channel Info
Press OK to confirm
dish check
and go to the next step
(see section
4.5.- SAT2
Logger
)
Bar graph of power
measurement
Color according to
checkmarks
Power and LKM
measurements
of the selected
channel with
pass/fail indicator
Result of
the scan
