Televes 5079, Руководство пользователя

Страница: 58 / 72

There are 7 possible channel tables that can
be selected using the following menu:
Table 1 : CCIR, New Zealand and Indonesia.
Italian channels.
Table 2 : China, Taiwan and CCIR
hyperband.
Table 3 : M/N, Chile.
Table 4 : France.
Table 5 : Australia.
Table 6 : South Africa, K1 (8 MHz), I (Ireland,
8 MHz).
Table 7 : Old USSR and OIRT.
j.- MPEG decoder version
Indicates the software version of the MPEG
decoder. For example; Version 2.10:
5.3.- Parameter recording
To record the data, it is necessary to press
the
button for approximately 3 seconds.
When the data is correctly recorded, the
following appears on the programmer's
display:
If the configuration data is modified but is
not recorded, the previous configuration is
recuperated once 30 seconds has passed,
in other words, the changes carried out are
cancelled.
Whenever an input parameter is modified
(input frequency and/or symbol rate) and
once the unit has managed to lock onto the
input signal, an automatic search of all the
available services will be carried out. The
time this takes depends on the number of
services that the transponder has. Whilst the
analysis is taking place, the display will
show the following message:
During the analysis of the input signal, it is
not possible to carry out any other operation
with the programmer.
5.4.- Status LEDS
Finally, the programmer’s LEDS indicate the
following operational status:
Correct operation
Insufficient input signal level
Unlocking of the QPSK demodulator
Encoded selected program
If the LEDs are switched on, this means that
it is working properly. If one of them is
switched off, this means that something is
not working properly.
NOTE:
The “C” LED will switch off if the selected
program is encoded. If it is an free pro-
gram, it wil switch on.
A B C
A B C
A B C
A B C
58
User manual QPSK-PAL