Televes 231180, Руководство пользователя

Страница: 3 / 12

3
Optical connection instructions
An SC/APC single mode fiber cable must
be used. Remove the protective cover
from the optical connector on the unit
and the cap on the cable connector.
Carefully align the guides on both
connectors when plugging a cable to the
apparatus, then push the connector all
the way in.
Take special care to avoid damaging the
unprotected ends of the connectors,
as small scratches, impurities and/or
particles of dirt, oil, grease, sweat, etc.
may significantly affect the quality of the
signal.
To clean the ends of the connectors,
gently rub with a lint-free lens cleaning
cloth, dampened using additive-free
isopropyl alcohol. Make sure the alcohol
evaporates fully before connecting. Keep
the connector covers and cable caps in
a safe place in case they are needed in
the future. Always fit the covers on the
connectors of apparatuss that are not
connected to cables to prevent the laser
beam from damaging the eyes.
Do not turn the transmitter on without a
fiber optic cable connected to it.
- The use of controls or adjustments or
any other procedures other than those
specified in this manual may lead to
exposure to harmful radiation.
- Carefully read and observe the instructions
given in this manual, and keep it for future
reference.
- Do not use the equipment in any way
that does not comply with the operating
instructions or in any conditions that
exceed the stipulated atmospheric
specifications.
- This equipment is not user-serviceable.
Should you require assistance, contact our
technical service department.
- Never point the laser beam intentionally
at people or animals.