USER’S GUIDE
20
USER’S GUIDE
9
3)
Insert the Curved Handle into the
designated opening of the Extension
Handle until it gets locked in place
with the Curved Handle Lock Button.
Make sure both parts, the
Extension Handle and the Curved
Handle, are secured in place before
usage.
4)
Turn the Lower Cord Wrap to align the
cord channel opening with the cord
channel in the Extension Handle as
illustrated in Fig. 4a.
Insert the Power Supply Cord all the way
in its channel and turn the Lower Cord
Wrap to lock the Power Supply Cord
as illustrated in Fig. 4b.
3b
3a
4b
4a
USER’S GUIDE
26
DUSTER
Make sure that the H2O MOP X5™ is unplugged.
1)
Fill the Water Tank with water. Please refer to
the “HOW TO USE THE H2O MOP X5™” section
in this manual.
2)
Install the Coral Cloth onto the Duster frame
and attach the Duster to the Extension Hose
as described in the “How To Assemble the
Optional Accessories” section in this manual.
3)
Select one of the following Steam Regulator
positions: 1 – Low, 2 – Medium or 3 – High
Do not use 4 - Hot Spray steam setting when using the Duster.
You can change the Steam Regulator position and change the steam output
while operating the H2O MOP X5™.
4)
Follow Step 3 described in the “How To Use the Hand-Hand Steamer“
section in this manual.
5)
Hold the Hand-Held Steamer in one hand and grasp the handle grip on the
Extension Hose with the other hand as illustrated above.
6)
Slowly pass over surface to be cleaned. The absorbent Coral Cloth picks up the
dirt loosened by the steam. Keep a towel handy and wipe away any excess water
that may accumulate.
Pulling on the Extension Hose with excessive force will damage it, possibly resulting
in a steam leak.
DANGER OF SCALDING
Do not touch the Duster/Coral Cloth during usage, as these components
can get extremely hot.
Keep the Extension Hose away from your body and avoid touching the
hose as it can get hot.
7)
When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the
unit, refill the Water Tank and continue cleaning.
!
WARNING
!
CAUTION
