TELEVAC MX4A Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 17

TELEVAC MX4A Скачать руководство пользователя страница 14

Instruction Manual

MX4A Active Convection Gauge

Figure 4: Graph of Analog Output Functions Available on the MX4A

3

RS-485 Communications

This gauge communicates with the host computer through an RS-485 interface. Each communica-
tion correspondence consists of a command line sent by the host computer and a response from the
gauge.

To communicate with the MX4A via RS-485, the user must have an RS-485 capable device to send
commands to the MX4A. Each command must be preceded by a * and will be an S, R, W, RC, or WC.
See the Communications Specifications heading for information on what settings are necessary to
properly communicate with the MX4A.

3.1

Changing Communications Settings

The communication parameters, (baud rate, address, etc.), are changed through the local menu.
Please see the section in this manual entitled Explanation of Menu Items and Navigation for more
information on navigating and editing within the menu. Below are provided some specifics on the
RS-485 Communications of the MX4A.

email: [email protected]

tel: +1 215 947 2500

web: frederickscompany.com

mx4a_im rev L

13 of 16

«
...
12
13
14
15
16
...
»

Содержание MX4A


















Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды