© 2017 The Fredericks Company | www.frederickscompany.com | [email protected]
| +1 215 947 2500
televac_an3018 rev -
Page
6
of
12
2.1.11
The unit is now configured to the network. Follow steps 2.1.2 to 2.1.7 to change the local computer back
to the original settings (original settings are the noted settings in step 2.1.6).
2.2
Verifying the Setup
2.2.1
After the IP address and subnet mask are configured, network connectivity can be verified through the
PLC or through the web functionality. To verify through the web functionality, type the IP address into
address bar in the browser and enter the username and password (default Admin:admin).
2.2.2
If the unit is connected to the network properly, the web page should be displayed. From here, data
parameters can be viewed and changed along with current EthernetIP network settings.
2.2.3
The unit should now be ready to use with a PLC. Please refer to Televac Application Note 3016 for
downloading the Electronic Data Sheet (EDS) and creating a connection.