Teletype 43 Teleprinter Basic RO, Руководство по обслуживанию

Страница: 133 / 222

MANUAL 406,2-43
F. PARTS
1.
2.
CONTENTS PAGE
GENERAL . . . . . . . . . . . . . . . . . . . . . 2-43
PARTS ........................ 2-44
Platen and Carriage Assembly . . . . . . . 2-44
Line Feed Spacing Motor and
Bell Assembly . . . . . . . . . . . . . . . . . . . 2-45
Spacing Drive and Lead Screw. . . . . . . 2-46
Right Side Frame (Friction Feed). . . . 2-4
7
Right Side Frame (Sprocket Feed)
and Rear Frame. . . . . . . . . . . . . . . . . . 2-48
Paper Tray...................... 2-49
Left Side Frame . . . . . . . . . . . . . . . . . 2-50
3.
NUMERICAL INDEX. . . . . . . . . . . . . 2-51
J
1. GENERAL
1.01 Information on maintenance spare parts is
provided in this part for the Pedestal
Based or Tabletop 43 Printer.
1.02 Part numbers are listed in the index in
numerical order and indicate the page on
which the parts appear. Asterisked numbers,
stocked as "List 1", indicate a maintenance spare
stocking ratio of one spare for the first twenty
stations and an additional spare for each add­
tiona! 30 stations in a maintenance area. Part
numbers without asterisks, stocked as "List 2",
indicate that one spare should be available in each
maintenance area.
1.03 All part numbers shown in this manual are
Teletype Corporation part numbers.
1.04 The Troubleshooting and disassembly/
reassembly information for these parts is
provided on Pages 2-2 and 2-21, respectively.