Teletronics International UDC 5800, Руководство по эксплуатации и установке

Страница: 5 / 7

5
DC Power Injector Connections, Indicators and labels
The DC injector injects DC power into the RF cable and the power is carried to the UDC with the RF
signal.
“To Radio”:
This “N” Female connector is connected to the radio via a short jumper cable.
“To UDC”:
This “N” Female connector connects to the UDC on the mast via the transmission cable.
LED: Green LED indicates DC power on.
DC Power Supply:
The power supply provided with the unit is universal type, 110/220 V AC to 9 VDC . This has been
tested for quality and performance. If a different 9 V DC adapter has to be used make sure it is
provided with center positive 2.5mm jack.
UDC5800 Connections, Indicators and Labels
“TO DC Injector”:
This “N” Female connector is connected to the DC Power Injector via the transmission cable.
“TO Antenna”:
This “N” Female connector connects to the antenna with a short length of coax cable.
LED:
This LED indicates three states:
Green =
Transmit
Red = Receive
Orange = High speed Tx / Rx switching