Teletronics International TT 900, Руководство пользователя

Страница: 10 / 57

10
Configuring Windows for IP Networking
To establish a communication link between your PC and TT900, you will need to set up a static IP address for your
computer first. This section helps you configure the network settings for your operating system. Please follow the
procedures below to complete the settings:
Windows XP
1. Click
Start
on the taskbar and from the
Control Panel
choose
Network Connections
. Right-click the
Local
Area Connection
icon and then choose
Properties
from the menu. You should see the
Local Area Connection
Properties
dialog box shown below.
2. Select the
Internet Protocol (TCP/IP)
for your network card, and then click
Properties
.
3. In the opened dialog box, choose
Use the following IP address
4. Under the
General
tab, choose
Use the following IP address
, and then specify an IP address. For example,
type in
192.168.10.X
in the
IP Address
(where X is any free IP number from 1-254, excluding 241) area and
255.255.255.0
in the
Subnet Mask
area.