Configuring Windows for IP Networking
To establish a communication between your PCs and the EzBridge 5800, you will need to set up a static IP address for
your computer first. This section helps you configure the network settings for your operating system. Please follow the
procedures below to complete the settings:
2.4 Windows
98/Me
1. Click
Start
on the taskbar and choose
Control Panel
from the submenu of
Settings
.
2. Select
Network
to open the
Network
dialog box, and then under the
Configuration
tab, select the
TCP/IP
protocol for your network card.
3. Click
Properties
to open the
TCP/IP Properties
dialog box.
4. Click
the
IP Address
tab and choose
Specify an IP address
. For example, type in
192.168.1.X
in the
IP
Address
(where X is any free IP number from 1-254, excluding 99)
area and 255.255.255.0 in the Subnet Mask
area. To ensure the system is now using the IP address you specify, restart the computer.
Содержание EzBridge 5800
Страница 1: ...EzBridge 5800 User Manual 500mW ...
Страница 18: ...Configuration ...
Страница 22: ...Administration ...
