Teletics MoNet-2M, Быстрое руководство по установке

Страница: 5 / 16

Introduction
The Teletics MoNet allows regular modems to communicate with each other
over any IP network, including cellular, wifi, private radio, satellite, landline,
cable, or DSL. The IP network can be either private or public.
A single MoNet at a Head Office location can dial multiple remote site
MoNets in a “one to many” basis.
Box Contents
The Tele5cs MoNet box contains the following:
•
MoNet
•
Ethernet cable
•
Power Adapter
•
Mounting kit for both wall/cabinet mount or DIN rail
Getting Started
If this is your first time using the MoNet, it is recommended that you spend
some time in a bench environment to familiarize yourself with the setup and
programming required prior to a first field installation.
The MoNet ships as a DHCP client, so it will ask for an IP address from
whatever LAN it is plugged into. If it does not receive an IP address from your
LAN, it will eventually wind up at 169.254.1.1 by default.
To find which IP address your new MoNet has, run the Beaconsearch utility,
available from the support section of the Teletics website:
www.teletics.com ! 5