Teletek electronics LCD64, Руководство по эксплуатации

Страница: 19 / 40

LCD64
- Operation Manual 19
English
Pressing a numeric button alternatively switches over the state of the chime from
disabled to enabled .
The selected programming is confirmed by pressing the
button . By default the chime is disabled .
See also the example for chime enable /
disable from User - page 14.
Zone Bypassing from manager
To execute a bypass operation the manager is required to enter a valid code
:
Pressing a numeric button bypasses the respective zone . The zone number is sur-
rounded by the “(
-
)” icon. Pressing the same key once again restores the zone by
-
pass. The “(
-
)” icon is removed. Pressing confirms the selection.
See also the
examples for zone bypassing from User - page 14.
setting the Clock
To set the clock the manager is required to enter his personal code .
setting the Date
To set the date the manager is required to enter his personal code .
adding a proximity card
To use proximity cards the system has to be equipped with a proximity card reader.
User No 01 - 20 or
manager address 2x
2 beeps
Deleting a proximity card
User No 01 - 20 or
manager address 2x
2 beeps
code
2 beeps
code
2 beeps
code
2 beeps
new time
(HH:MM)
code
2 beeps
new date
(DD:MM)
code
code