Sensors (if applicable) – measuring and control
EN
Zone On/Off:
will switch the displayed sensor zone ON or OFF.
In most cases this will mean that your heating system will not
heat but is still protected from freezing. This feature is
particularly useful for guest- and rarely occupied rooms
(energy management feature).
The ‘Zone’ selection:
With this button you can scroll through
the different zones (rooms) of your house/building. Every click
jumps to a new zone and the according values for that zone
are displayed and can be changed.
Remark: each panel can be configured to show a limited
number of zones only. Please contact your system integrator
for more information.
Pressing LONG will bring up the "change presets" menu.
Editing zone presets (if applicable)
If you want to change the presets of another temperature zone/room than the
one you are in now, first scroll towards the correct zone by short clicking on the
zone selection button (by default in the lower-right corner).
Now long press on the zone-button to go to the preset configuration
menu.
Select the desired preset: (predefined) <DAY>, <NIGHT> or <ECO>
Set temperature at heating: if a heating system has been integrated in the
current zone, you can set the preset’s target temperature for heating for the
selected preset.
Set temperature at cooling: if a cooling system has been integrated in the
current zone, you can set the preset’s target temperature for cooling for the
selected preset. (both heating and cooling can be applicable as well)
Press 'OK' or press the hidden 'main page' button to go back.
