1
Recording with GPS-receiver
Connected GPS-receiver makes it possible to define the geographical point of the
recording.
To do this:
Switch on power supply of GPS-receiver in the tab “Setting – Others”
“Rec-Manager-a”
Plug the GPS-receiver into the recorder’s 6-connector, the recorder’s indicator will
show GPS, marking correct connection of the receiver. If the GPS module is pow-
ered – red LED will be on and the module will operate in satellite searching mode.
If LED starts to blink in a series of flashes, that means that satellites are found and
the positional information is being recorded.
You can also set the operating mode through the recorder’s menu.
Data flow from GPS-receiver is saved on the card when the “Extract GPS data” is
ticked off in the tab “Setting” when pushing the button “Setting”. When converting
the recording a GPS file with the same name as the video recording will be created
in the folder with video files. This file can be opened with Google Earth.
In the recorder’s “Other settings” menu in the section “Expansion slot” you can se
-
lect the operation mode of GPS module power supply (in a similar way to the video
recorder’s power supply). There you can also select a set of adapter’s inputs that
are used for recording control as well as their active output. Positional coordinates
are saved on video picture. A list of available codes is displayed in the manager
when hovering a cursor over “Text 1” or “Text 2” (Setting” – Video”).
