13
If you have a problem with this, use a paperclip as
shown in the picture. Insert the paper clip tip into
the hole and push out the battery.
Use this hole to
push rechargeable
battery out.
Press in this
direction
Fixative jut
Figure 8.
To install or take out the rechargeable battery, press lightly on the back side of the
recorder as shown in the picture. The fixative jut will slide out so you can install or
take out the rechargeable battery.
Figure 9.
Working with the Recorder
Main Recorder Modes
After you install the rechargeable battery or connect the recorder to a power source,
the recorder turns on automatically. After a period of time that was previously set in
the recorder settings (30 sec by default), the recorder will switch into the stand-by
mode. In this mode, power consumption is minimal and the recorder will not need
another recharge for about a year. However, we recommend charging the recorder
every three months to keep it ready for use. If you do not use the recorder for more
than 6 months, charge the rechargeable battery and take it out of the recorder.
