TELE System
Step 4:
TV connection to the Internet network necessary to use the connected Smart / TV functions.
If the Ethernet cable has already been connected to the TV's RJ45 port, the connection to the home
modem/router will take place automaticallyl. If it is not possible, configure the Wireless connection
using the arrow keys and ENTER on the remote control: select the item
Use Wi-Fi network
, choose
your own Wi-Fi network from the list of detected networks, type the correct network password very
carefully (press ENTER to bring up the virtual keyboard), then select the
Connect
item. Finally press
the arrow key
►
to go to the next step.
Step 5:
To download the application, simply frame the QR code visible on the screen with the
appropriate QR/video camera of your mobile device, then proceed with the installation.
ATTENTION!
Make sure that your mobile device and Smart TV are connected to the same home data network.
The application does not totally replace the traditional remote control, it is mainly designed to
control the Smart features of the TV (applications, media player, etc. ...)
Some IP applications require the use of a keyboard and/or a cursor/mouse; in this case, the
traditional remote control supplied with the TV is not sufficient to control them.
Step 6:
choose the user's favorite mode / source. In particular
Main functions
Digital TV mode
if you have selected the
TV
mode, you need to scan a digital TV channel. To access the
Channel
menu, set the
Antenna Type
between
Digital Terrestrial
(DVB-T / T2),
Cable
(DVB-C) or
Digital
Satellite
(DVB-S / S2), make sure that the corresponding antenna cable is correctly connected,
define the search parameters and proceed with the scan.If you opt for automatic scanning of digital
TV, the TV will propose that you upload a list of Italian satellite default channels with a typical
arrangement of the TivùSat platform channels.
NOTE
The viewing of the encrypted TivùSat channels requires the use of a dedicated conditional access
module (CAM) and card (Smart-card), to be purchased separately.
Due to frequent satellite channel updates, the default satellite channel list may contain obsolete
channels and may not coincide exactly with the TivùSat channel list.
Once the selected frequencies have been scanned, the TV will create the channel list with the
defined arrangement (e.g. the LCN one, corresponding to the numbering requested by the
terrestrial channel issuers).
If you want to proceed with the scanning of different input/antenna channels, proceed as described
above choosing the corresponding type of antenna desired (different from the previous one). The
different available channel lists will then be available only if the TV is in the correct TV section
(terrestrial/cable/satellite). In particular, to switch from viewing a terrestrial channel to a satellite
channel, press the MENU button, enter the Channel menu and set Digital SAT (satellite) as Antenna
Type. Obviously to return to the terrestrial channel list, set Digital terrestrial as Antenna Type. The
TV will create a channel list with the defined ordering (e.g. the LCN one, corresponding to the
numbering requested by the terrestrial channel broadcasters) once TV has scanned the frequencies.
If you want to scan channels from a different input/antenna, then proceed as just described above
by selecting the corresponding
Antenna type
(a different one from the previous). The various