CFO100
user manual
5
CRT103 stand-alone installation
The units can be installed for stand-alone use by using a
CMA015
(installation for one 5HP wide units) module adapters. To insert a
CRT103
card unit into the module adapter, push the unit along the guide
rails into module until the unit is firmly attached. Secure the plug-in unit
with the upper and lower locking screws. The stand-alone unit should be
mounted to a vertical surface.
The permitted supply voltage range is 10.5...14 VDC. The current
consumption is 300 mA. The permitted operational temperature range is
-34...+74°C.
Note!
Alternatively the units can be installed for stand-alone use by
using a
CMA025
(installation for two 5HP wide units) or
CMA035
(installation for three 5HP wide units) module adapters.
The 12V DC supply voltage is supplied by the means of a separate
mains adapter with a regulated output, (e.g.
CPS251
).
Please refer to
separate documention for module adapters and mains adapters.
For limited space installation the
CMA015/025/035
module adapters can
be rear-mounted by means of an optional installation kit
CIK002
.
CPS251
12VDC mains adapter.
CMA015
module adapter.
CMA025
module adapter with
CIK002
rear mounting kit.
1. CMA025 module adapter
2. CIK002 rear mounting kit
DC
connection polarity
210.9
133
35.5
CMA
CPS
1
2
