Telesis TMP1700, Руководство пользователя

Страница: 4 / 10

TMP1700/470 Marking System
4 of 10 28575G
TMP1700 MARKING HEAD
(continued)
Marking Depth
The following tables provide sample marking depths. Drive air
was set at 80 psi (5.5 bars); return air was set at 20 psi (1.4 bars);
pin stroke was set to the maximum allowable distance for each pin
type to achieve the maximum depth of mark.
Depth – Type 25L & 25XL Powdered-Metal Pins
MATERIAL
(HARDNESS)
22°
CONE
30°
CONE
45°
CONE
60°
CONE
Aluminum
(Rb3) .005 in.
.127 mm .007 in.
.178 mm .011 in.
.279 mm .016 in.
.406 mm
Brass
(Rb18) .003 in.
.076 mm .005 in.
.127 mm .009 in.
.229 mm .012 in.
.305 mm
Cold Rolled Steel
(Rc18) .003 in.
.076 mm .005 in.
.127 mm .008 in.
.203 mm .012 in.
.305 mm
Depth – Type 25L & 25XL Carbide Pins
MATERIAL
(HARDNESS)
22°
CONE
30°
CONE
45°
CONE
60°
CONE
Aluminum
(Rb3) .006 in.
.152 mm .007 in.
.178 mm .010 in.
.254 mm .011 in.
.279 mm
Brass
(Rb18) .005 in.
.127 mm .007 in.
.178 mm .008 in.
.203 mm .009 in.
.229 mm
Cold Rolled Steel
(Rc18) .004 in.
.010 mm .005 in.
.127 mm .007 in.
.178 mm .009 in.
.229 mm
Depth – Type 150S Pins
MATERIAL
(HARDNESS)
22°
CONE
30°
CONE
45°
CONE
60°
CONE
Aluminum
(Rb3)
N/A
.008 in.
.203 mm .012 in.
.305 mm .018
.457 mm
Brass
(Rb18)
N/A
.007 in.
.178 mm .010 in.
.254 mm .017
.432 mm
Cold Rolled Steel
(Rc18)
N/A
.006 in.
.152 mm .008 in.
.203 mm .013 in.
.330 mm
Depth – Type 150SA Pins
MATERIAL
(HARDNESS)
22°
CONE
30°
CONE
45°
CONE
60°
CONE
Aluminum
(Rb3)
N/A
.008 in.
.203 mm .012 in.
.305 mm
N/A
Brass
(Rb18)
N/A
.007 in.
.178 mm .010 in.
.254 mm
N/A
Cold Rolled Steel
(Rc18)
N/A
.006 in.
.152 mm .008 in.
.203 mm
N/A
Vibration Data
Vibration tests were performed under controlled conditions
imitating, as closely as possible, typical normal operation.
Conditions such as rigidity of the work piece, material, setting of
the machine, etc. may vary in actual operational use and would
alter the actual vibration level. Despite detailed guidance
instructions provided with each machine, such conditions are
beyond the control of Telesis and must remain the responsibility
of the end user. Accordingly, you should conduct your own tests
to establish safe working levels of use.
The vibration tests were conducted using the following
parameters:
Drive Air Pressure ................... 4.08 bars (60 psi)
Return Air Pressure ................ 1.36 bars (20 psi)
Pin Stroke ................................ 8 mm (.31 in)
Marking Base .......................... 20 mm (.79 in) thick steel
Marking Surfaces .................... 2 mm (.08 in) thick steel plate
4 mm (.16 in) thick aluminum plate
Marking Mode .......................... Dot
Text Marked ............................. TELESIS
(11x16 font, 5mm [.20 in] characters)
HHHEEE000888
(5x7 font, 3mm [.12 in] characters)
The following test results reflect the worst-case scenarios under
the given test conditions.
Steel Marking Surface
Pin VM T
(EAV)
T
(ELV)
25C 0.4 m/s
2
more than 24 hr more than 24 hr
150SA 0.8 m/s
2
more than 24 hr more than 24 hr
Aluminum Marking Surface
Pin VM T
(EAV)
T
(ELV)
25C 0.6 m/s
2
more than 24 hr more than 24 hr
150SA 1.2 m/s
2
more than 24 hr more than 24 hr
where:
VM
= hand/arm vibration magnitude.
T
(EAV)
= time to reach the Exposure Action Value based
on continuous marking.
T
(ELV)
= time to reach the Exposure Limit Value based on
continuous marking.