TELES VoIP Box BRI Series, Справочное руководство

Страница: 71 / 226

4 Configuration files
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 71
Sending Alarm Messages via E-mail
With the appropriate configuration, you can send e-mails con-
taining alarm messages that are written into the log file. The
sender is given as
alarm
and the system’s name appears in
the subject box. The text box contains the alarm message.
The following entry in the configuration file activates this func-
tion.
4.2.3 Night Configuration
The
[Night<num>]
section is reserved for prospective time-
controlled configuration changes. In the
pabx.cfg
file, the
Night
sections contain all of the system’s
Subscriber
entries.
Simply copy all
Subscriber
lines into the
Night
Section with-
out making any changes.
The sections for the time-dependent configuration changes
and time-controlled routings are defined here.
A maximum of 19 additional daily configuration zones are
possible (
Night1
to
Night19
). The entry
NightResetTime
re-
activates the original configuration contained in the
[System]
section.
The entry will have the following syntax:
Example 4.13 Sending Alarm Messages via E-mail
ActionLog=/data/protocol.log daily 1000 5 @<e-mail account>
Table 4.13
pabx.cfg
: Night Parameters
Night<num>=<time> <day>
<num>
Enter a value between 1 and 19 to define which configuration is to be
loaded.
<time>
If there is a time set with the format
hh:mm
after this entry, this con-
figuration is loaded daily at that time on the defined day.
<day>
Use a bitmask to set the weekdays on which the configuration applies
here. The daymask appears in the following order:
HoSaFrThWeTu-
MoSu
.