TELES VoIP Box BRI Series, Справочное руководство

Страница: 63 / 226

4 Configuration files
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 63
In the following entry, the file
failed.log
is renamed once a
week. Up to 10 failed files will be saved on the system.
In the following entry, the file
protocol.log
is renamed when
the file has reached 1MB. Up to five log files will be saved on
the system.
4.2.1.3 DNS and NTP settings
The following settings for the domain name service (DNS) and
the network time protocol (NTP) are enterted after the log set-
tings. DNS translates domain names to IP addresses. NTP is
used to clock synchronization over the IP network. Table 4.8
→
describes the parameter used for this configuration.
Example 4.8 failed.log renamed once a week
failedlog=/boot/failed.log weekly - 10
Example 4.9 protocol.log renamed when file size = 1MB
ActionLog=/boot/protocol.log - 1000 5
There is no internal time generation for the system when
the power is interrupted. This means the default time is
used when the system is restarted or rebooted!
Therefore it is important to set the system time with an
NTP server.
If the system is connected via ISDN, a clock may come
from the network connected to the corresponding port.
Enter
TIME
in the
pabx.cfg
’s
Subscriber
line for the TE
port to take the time from the port.
!