4 Configuration files
VoIPBox DSL / VoIPBox BRI – version 21.0.009
Page 53
This chapter describes the basic setup and the most com-
monly used entries for the configuration files. Configura-
tion of VoIPBoxes is managed in the following three files:
ip.cfg
,
pabc.cfg
, and
route.cfg
.
The default configuration with the IP address 192.168.1.2 is
active after delivery. You can configure the system using the
GATE Manager.
Make sure you secure the system with new passwords follow-
ing configuration and remember to memorize the passwords
!
These configuration files contain all system-specific settings
and are used when the system starts. Comments included in
these files must begin with a semicolon. Comments can also
be placed at the end of the code line. Configuration files must
end with an empty line.
Table 4.1
Configuration Files
File
Function
ip.cfg
This file is for the basic configuration of the Ethernet interfaces.
pabx.cfg
This file is for system-specific and port-specific settings.
route.cfg
This file is for routing and VoIP entries.
Changing configuration data may lead to malfunctions
and/or misrouting, as well as possible consequential dam-
age. All changes are made at own risk. TELES is not liable
for any damage caused by or in relation to such changes.
Please thoroughly check any changes you or a third party
have made to your configuration.
!
Содержание VoIP Box BRI Series
