1-19 TM106601_(7/01)
USE OR DISCLOSURE OF DATA CONTAINED ON THIS PAGE IS SUBJECT TO THE
RESTRICTION ON THE TITLE PAGE OF THIS DOCUMENT
.
C
O M M A N D
S
Y S T E M S
D
I V I S I O N
SRCH
OFF
SBY
TST
ON
60
WX
WXA
SRCH
PULL STAB OFF
TILT
DN
UP
0
BCN
ONLY
BCN
FMT
BCN
CODE
GAIN
GAIN
Figure 1.6-4. CP-113P Radar Control Panel
Table 1.6-1. CP-113 Function Select Switch Description
Function Select Switch
Description
OFF
Deactivates the weather radar system by removing power to the
radar R/T. This switch is hardwired to the radar system.
STBY
Places the radar R/T in Standby mode. Radar displayed data is not
present in Standby. Standby mode is used during the warm-up
period of the radar system and when the aircraft is on the ground.
TST
Causes the radar R/T unit to send a radar test pattern to the radar
display system. The radar transmitter is not active in Test mode.
ON
In this position, the radar system is turned on. The radar will scan
120
°
(or 90
°
in some systems), the transmitter is active, and the
receiver will send weather (target) data to the display system.
60
°
Directs the antenna to sector scan 60
°
about the boresight of the
aircraft. This position will work in weather, search (map), and
beacon modes.
LOG
Selects Flight Log mode to be displayed on the Multi Function
Display (MFD). In Flight Log mode, the MFD will display the log of
waypoints stored in the Navigation system.
