manualshive.com logo in svg

Telemotive telePendant, Руководство по программированию и эксплуатации, Страница: 24 / 31

Поделиться
Скачать
Telemotive telePendant Скачать руководство пользователя страница 24

Section 5 – Programming (Continued) 

 24 

8/2/2004 

5-3.3. 

2-Speed

 telePendant

 Programming. 

NOTE 

IF REPLACING A MEMBRANE OR PENDANT 
TRANSMITTER, YOU CAN COPY THE SWITCH 
SETTINGS ON THE EXISTING TRANSMITTER.  

Membrane:  Copy Switch 3 (all positions) settings on 
the Membrane transmitter to S3 on the PDA. 

Pendant:  Copy Switch 3 (positions 1, 2, 3 and 8) 
settings on the Pendant transmitter to S3 (positions 1, 2, 
3 and 8 respectively) on the PDA. Copy Switch 4 
(positions 5, 6 and 7) settings on the Pendant transmitter 
to S3 (positions 5, 6 and 7 respectively) on the PDA. If 
Switch 4 on the Pendant transmitter has positions 1 and 
or 2 Switched ON see the write-up on Main/Aux Menu 
below. If SW4 position 3 is switched “ON” un-check 
Tandem box on PDA. If SW4 position 4 is switched 
“ON” check Invert box on PDA. 

M. 

S3 Programming. Not required for an 
InteleSmart receiver. 

S3 Positions 1-3 Repositioning of 

telePendant

 

Transmitter Motion Switch Functions. (Standard 
configuration all “OFF”).  

S3 positions 1 through 3 can change the functional 
positions of the switches controlling hoist, trolley and 
bridge. This reconfiguration does NOT affect receiver 
wiring. As these switches are changed the motor controls 
are moved.  

Standard, Motor 1 is H (Hoist) Motor 2 is T (Trolley) 
and Motor 3 is B (Bridge). The standard configuration 
(all switches OFF) is, starting at the top right hand pair 
of buttons on the transmitter, Motor 1. Moving down to 
the middle two right hand pair of buttons that is Motor 2. 
The bottom pair on the right is Motor 3. This is indicated 
the display “Switch config: H,T,B. The order of Hoist, 
Trolley and Bridge will vary as S3-1 to 3 switch 
positions is changed. Toggle the switches sequencially 
till you see the order you need. There are six possible 
combinations. 

 

S3 Position 4 And 8 Time-out-timer Disable. 

(Normally turned “OFF”). 

Disables the transmitter time-out-timer if turned ON. If 
the time-out-timer is active, the length of time for time 
out can be selected for numbers of minutes till shut 
down. The minutes are selectable in one-minute steps 
from 1 to 10 and five minutes steps up to an hour. Tap 

on the “Timer” arrow and scroll down through the 
number of minutes and tap on the desired number. 

Positions 5-7 Special Crane Control Configurations. 
(Standard all “OFF”). 

The wiring section of the manual for receiver shows all 
the different crane configurations and the switch 
positioning needed to achieve them. The standard 
transmitter comes with the output standard output 
configuration. For special crane control configurations 
program S3 positions 5-7 to match the programming 
information shown for the respective wiring diagram. 
When any of the special crane configuration switches is 
turned ON, the words “Crane control enabled” appears 
on the display and Main/Aux disappears. 

Position 8, Same as Switch Position 4. See write up 
for switch 4 above (Normally turned “OFF”). 
 

N. 

Main/Aux Menu for controlling the 
“Programmable Motor Control and Select Push 
Button”. 

This menu shows only if no Special Crane 
Configurations are selected (Switch 3 positions 5-7). 
This programming redefines the function of the button 
just above the E-STOP. 

(If a three motor crane use “Aux”, for standard four 
motor use “Motor ”, for Select function use Select). 

If replacing a Pendant transmitter: if Switch 4 on the 
Pendant transmitter has position 1 “OFF” and position 2 
“ON” use “Motor”, if Switch 4 has position 1 “ON” and 
position 2 “ON” use “Select”. 

For a three motor system this Programmable Motor 
Control and Select push button is non functional. 

For a four motor system this button controls a main and 
aux motor such as a hoist. (See Section 4. Operation, for 
details on the operation of this button.) To program a 
fourth motion select “Motor”. This four motor 
application can only be used with 4 motor crane 
configurations. The Programmable Motor Control and 
Select push button becomes a switch to toggle between 
“A” and “B” or both. Where “A” and “B” are main and 
auxiliary motors respectively. The main motor output is 
motor 1 and the auxiliary motor output is motor 4.  

For up to 5 motors using the select function this button 
is available to use select relays. This select function can 
only be used with five crane configurations. To program 
in the select function tap the word “Select”. The 
Programmable Motor Control and Select push button 

Содержание telePendant
































Отзывы:

Нет отзывов