Total Load - 7.5 lbs.
CP-ITV Pan/Tilt Video Camera Mounting Accessories
CAM-WMBKT
Caution
Due to variation of wall and
ceiling construction, hardware
for mounting the brackets is not
provided. Exercise care when
securing bracket. Installation
should be verified for proper
fastening and safety.
Camera
8.90"
4.50"
.15”Dia
2 Holes
.21”Dia
2 Holes
2.90”
1.45”
2.65"
3.20"
3/03 printed in U.S.A.
6 Leighton Place
Mahwah, New Jersey, U.S.A. 07430
Phone: (201)848-9818 Fax: (201)848-9819
www.telemetricsinc.com
Specifications and features subject to change without notice.
Installation Instructions:
1. Mount the base to the wall using the proper fasteners for the mounting surface.
2. Hook the wall mount to the base and attach with the #8 self tapping screw provided.
3. If routing the cables through the bracket, run the unterminated wiring through the hole allowing enough slack
for camera movement.
4. Terminate the wires with the required connectors.
5. Install the bottom cover by hooking the curved end into the base and securing with the #6 screw provided.
6. Mount the camera and lock in the desired position using the locking knobs.
Base
Bracket
Locking Knobs
Bottom Cover
The CAM-WMBKT is a light duty wall mounting bracket intended for use with the pan/tilt cameras in the Telemetrics CP-ITV
system. It is constructed of light gray, high impact plastic and has a hollow body to allow concealed cable routing. The
adjustable head has separate locking knobs for horizontal and vertical movement allowing a wide range of camera
angles.
