background image

 

IMPORTANT SAFETY INSTRUCTIONS 

 
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to 
persons, including the following: 
 
1.   Read and understand all instructions. 
 
2.   Follow all warnings and instructions marked on the product. 
 
3.   Unplug this product from the wall outlet before cleaning.  Do not use liquid cleaners or aerosol cleaners.  Use a damp cloth for cleaning. 
 
4.   Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet   
      basement, or near a swimming pool. 
 
5.

Do not place this product on an unstable cart, stand, or table.  The product may fall, causing serious damage to the product. 

 
6.   Slots and openings in the cabinet and the back or bottom are provided for ventilation, to protect it from overheating, these 
      openings must not be blocked or covered.  The openings should never be blocked by placing the product on the bed, sofa, 
      rug, or other similar surface.  This product should never be placed near or over a radiator or heat register.  This product 
      should not be placed in a built-in installation unless proper ventilation is provided. 
 
      IF UNIT IS EQUIPPED WITH POWER ADAPTER: 
7.   This product should be operated only from the type of power source indicated on the marking label.  If you  are not sure of 
      the type of power supply to your home, consult your dealer or local power company. 
 
      IF ADAPTER IS PROVIDED WITH A GROUNDED TYPE ATTACHMENT PLUG: 
8.   This product is equipped with a three wire grounding type plug, a plug having a third (grounding) pin.  This plug will only fit 
      into a grounding type power outlet.  This is a safety feature.  If you are unable to insert the plug into the outlet, contact your 
      electrician to replace your obsolete outlet.  Do not defeat the safety purpose of the grounding type plug. 
 
      IF ADAPTER IS PROVIDED WITH A POLARIZED ATTACHMENT PLUG: 
      This product is equipped with a polarized line plug (a plug having one blade wider than the other).  This plug will fit into the 
      power outlet only one way.  This is a safety feature.  If you are unable to inset the plug fully into the outlet, try reversing the 
      plug.  If the plug should still not fit, contact your electrician to replace your obsolete outlet.  Do not defeat the safety 
      purpose of the polarized plug. 
 
9.   Do  not allow anything to rest on the power cord.  Do not locate this product where the cord will be abused by persons walking on it. 
 
10.  Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 
 
11.  Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short 
       out parts that could result in a risk of fire or electric shock.  Never spill liquid of any kind on the product. 
 
12.  To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified serviceman when some 
       service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks.         
       Incorrect re-assembly can cause electric shock when the appliance is subsequently used. 
 
13.  Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: 
 
       A.  When the power supply cord or plug is damaged or frayed. 
 
       B.  If liquid has been spilled into the product. 
 
       C.  If the product has been exposed to rain or water. 
 
       D.  If the product does not operate normally by following the operating instructions.  Adjust only those controls, that  
            are covered by the operating instructions because improper adjustment of other controls may result in damage and will 
            often require extensive work by a qualified technician to restore the product to normal operation. 
 
       E.  If the product has been dropped or the cabinet has been damaged. 
 
       F.  If the product exhibits a distinct change in performance.  
 
14.  Avoid using a telephone (other than a cordless type) during an electrical storm.  There may be a remote risk of electrical 
       shock from lightning. 
 
15.  Do not use the telephone to report a gas leak in the vicinity of the leak. 

 
 
 

SAVE THESE INSTRUCTIONS

 

4

Содержание Marquis 9002MWD







































Отзывы: