Telematrix marquis 3000MWD, Инструкция по установке и эксплуатации

Страница: 12 / 20

Storing A Number Into Memory
Up to 10 phone numbers can be stored
into memory. Each location can store up to
32 digits in tone mode.
Note: a “PAUSE” or “FLASH” programmed
into memory counts as one digit when
storing a number.
1. Lift the handset.
2. Press the STORE key.
3. Enter the numbers to be stored using
the numeric dial pad.
4. Press the desired memory location
wherein the number is to be stored.
5. If additional numbers are to be stored,
repeat steps 3 thru 4.
6. Hang up the handset.
Storing “PAUSE” Into Memory
If you are using your 3000MWD anywhere
that requires and access code for outside
calls, you may need to add a “PAUSE” to the
number to allow tine for the outside line to
connect. You can enter as many pauses as
needed.
Note: a “PAUSE” or “FLASH” programmed
into memory counts as one digit when stor-
ing a number.
1. Lift the handset.
2. Press the STORE key.
3. Enter the required access code using the
numeric dial pad.
4. Press the “PAUSE” key.
5. Enter the digits to be stored using the
numeric dial pad.
6. Press the desired memory location
wherein the number is to be stored.
7. If additional numbers are to be stored,
repeat steps 2 thru 6.
8. Hang up the handset.
FLASH Hook Function
The Flash function is used to access PBX fea-
tures or Telco line features such as Call Wait-
ing. The FLASH function is a 600mS timed
line beak. If the FLASH function will be used
often, store the feature into memory loca-
tion for easy access as follows:
1. Lift the handset , Press the STORE key.
2. Press the “FLASH” key.
3. Press the memory location wherein the
“FLASH” is to be stored.
4. Hang up the handset.
9
PROGRAMMING SPEED DIAL
Note: Call TeleMatrix Priority
Care Department for possible
Flash Timing and Pause Tim-
ing Programming options.