Function
1.
Support DHCP automatic distribution of IP addresses and other parameters
2.
Support PPPOE agreement (ADSL, cable modem access use)
3.
The program can be upgraded via HTTP, HTTPS, FTP or TFTP
4.
Dynamic voice detection; comfort noise generation; voice buffer technology
5.
Hold function
6.
Speed dial
7.
DND (Do Not Disturb), blacklist, call restriction, hotline function
8.
Voicemail
9.
Using a standard web browser (such as IE) for setting
10.
SSH remote management function
11.
Classified management for common user password and remote user password
12.
Support * * code function
13.
Call Waiting Feature
14.
Auto answer
15.
Call park
16.
Call transfer
17.
Tripartite conference
18.
802.1x Authentication
19.
LLDP Feature
Standard and Protocols
◆
IEEE802.3/802.3u10 Base T/100Base
◆
PPPoE: Point to point protocol over Ethernet
◆
DHCP Client and Server: Dynamic Host Configuration Protocol
◆
Support G.711a/u, G.729, G.723.1, G.722, iLBC speech encoding algorithm
◆
SIP RFC3261, RFC2543
◆
TCP/IP: Internet transmission control protocol
◆
RTP: Real-time Transfer Protocol
◆
RTCP: Real-time Control Protocol
The phone started, get Provisioning Server address by DHCP Server, then the phone LED lights flashing, and issued a
"beep beep" prompt tone, "Config ID". Through the digital keyboard input after the ID, and then enter the "#", then
the opportunity to Provisioning Server automatically load the configuration file, automatically restart after the
success; if this fails, then the opportunity to enter the default standby state, after 15s can log on; if you do not want to
download directly into the standby state # by default. If you do not complete the download, or download the
configuration file in the AutoUpdate Settings config ID no configuration parameters, will still be asked to enter
"Config ID" after the restart.
After the phone has entered the default state, you can have the phone to broadcast the IP address by pressing “**47#”.
