4
www.telematrix.net
3100 SERIES USER GUIDE
• Use caution when installing or modifying
telephone and network lines .
CONNECTING THE HANDSET CORD
A 10-ft modular handset coil cord is provided . To
install, simply plug one end of the coil cord into
the jack at the base of the handset, and the other
end into the jack located on the left side of the
telephone base marked Handset .
CONNECTING THE LINE CORD
A 12-ft . modular line cord is provided . To install,
simply plug one end of the cord into the modular
jack on the underside of the base unit and the
other end into the wall jack .
Wall Mounting
WALL MOUNTING (OPTIONAL)
The 3100 Series telephones was designed to
conveniently wall mount .
Please follow these easy steps:
1 . The handset retaining clip must be engaged
to secure the handset when hanging it up .
To engage the clip, unsnap the clip, rotate
the clip 180 degrees and then snap the clip
into place .
2 . Plug one end of a short line cord into the
line jack on the underside of the base unit .
Plug the other end of the line cord into the
wall jack .
3 . Attach the wall mount bracket on to the
back of the phone, placing mounting clips
into brackets slots—push in place until you
hear them snap into place .
4 . Next, guide the phone with wall mount
wedge onto the studs of the wall jack . Press
down firmly until you feel it snap into place .
The unit is now wall mounted .
Parts Check List
The following parts are included in this package:
• Line cord
• Handset coiled cord
• Base
• Handset
• Faceplate
• Plastic faceplate overlay
The following are optional items possibly included
(must be ordered separately):
• Wall mount adaptor bracket
• Short line cord for wall mounting
Care and Maintenance
•
Keep the telephone dry. If it gets wet, wipe it
dry immediately . Liquids might contain minerals
that can corrode the electronic circuits .
•
Use and store the telephone in a normal
temperature environment. Temperature
extremes can shorten the life of electronic
devices and distort or melt parts .
•
Keep the telephone away from excessive dust
and dirt that can cause premature wear of parts .
•
Wipe the telephone with a damp cloth
occasionally to keep it looking new . Do not use
harsh chemicals, cleaning solvents, or strong
detergents to clean the system .
Installation
CAUTION INFORMATION
• Never install telephone or network wiring
during a lightning storm .
• Never install telephone or Ethernet jacks in
wet locations unless the jack is specifically
designed for wet locations .
• Never touch uninstalled telephone wires or
terminals unless the telephone line has been
disconnected at the network interface .
