9
“TS ID
5-4”
: User can configure the Transport Stream ID.
The range is from 1 to 65535.
Note: For single channel encoder, there is no this menu.
3.2.6 IP1 Setting
“Source
6-1”
: User can select the output source. There are 6
types of souce: none, enc1, enc2, enc3, enc4 and mux. None means disable this ip
output port.
“Source IP
6-2”
: The local IP Address setting.
“Source Netmask
6-3”
: Subnet Mask setting.
“Source Gateway
6-4”
: Default Gateway setting.
“Source MAC
6-5”
: Physical Address setting. It is a unique value
in any network.
“Source Port
6-6”
: The local IP port setting.
“Destination IP
6-7”
: Destination IP Address setting. The device
will auto send the TS data to this IP address.
“Destination Port
6-8”
: Destination Port setting. The device will auto
send the TS data to this port.
“Protocol
6-9”
: There are 3 types of protocol: UDP, RTP and
Pro-MPEG. If the protocol is Pro-MPEG, the next 2 menu would be valid.
“FEC Col Offset
6-10”
: It is valid only the protocol is Pro-MPEG. By
now, the range is from 4 to 16.
“FEC Col NA
6-11”
: It is valid only the protocol is Pro-MPEG. By
now, the range is from 4 to 16.
“IGMP
6-12”
: Default is disabling. It’s useless in normal
network.
3.2.7 IP2 Setting (Optional)
The menu is similar to IP1 Setting.
3.2.8 IP3 Setting (Optional)
The menu is similar to IP1 Setting.
Содержание IDH-9001
Страница 1: ...MODEL IDH 9001...
Страница 2: ...Single Channel H 264 HD Encoder User s Guide...
