Telegärtner DoorLine TM4, Инструкция по эксплуатации и сборке

Страница: 26 / 52

5
Configuration
26 / 52 DoorLine TM4
5.12 Defining door opener time
Actuation time of the door opener.
Possible values: 1 to 9 seconds or deactivate with 0
Delivery status: 3 seconds
With door opening with redial #9
If relay contact 2 was defined as door opener.
1. Enter the configuration mode (see Entry to configuration
mode [
} 19])
2. Actuate the hashtag button and star button on the tele-
phone
3. Enter configuration command "05" at the telephone
As confirmation, you will hear a neutral acknowledgement
tone
4. Define the switching time of the door opener by entering
the digits 1 to 9 (digit corresponds to the duration in
seconds, 0=deactivated)
Finally, you will hear the positive acknowledgement tone
With door opening with redial #8
If relay contact 1 was defined as door opener.
1. Enter the configuration mode (see Entry to configuration
mode [
} 19])
2. Actuate the hashtag button and star button on the tele-
phone
3. Enter configuration command "03" at the telephone
As confirmation, you will hear a neutral acknowledgement
tone