Telefunken TX 103, Руководство пользователя

Страница: 58 / 86

TX Bluetooth 58
11. When the handset displays Headset A paired to base. Connect now? Press OK, then
press MENU/OK on the handset.
- When you already have two devices on the active devices list, the handset shows
Maximum of 2 devices can be connected . You are prompted to replace an existing
headset on the active devices list
- When you already have one headset on the active devices list, the handset shows
Only 1 headset can be connected . You are prompted to replace the headset on the
active devices list
10. When a device is successfully connected, the handset displays Headset setup
completed Device connected and the corresponding status icon ( Mobile1 or Mobile 2 ).
Note: The pairing process may take up to one minute. If the pa iring process fails, try again.
If you pu t the handset back in the telephone base or charger wh ile pairing, the process
discontinues and the handset returns to idle mode.
Auto connection
When a device is successfully paired with the telephone base but not connected, the handset
displays
Headset setup completed Device not connected and then Auto-connect function
enabled Press OK . You can press MENU/OK to exit. You can also connect a device manually.
E. Paired devices
All paired devices are stored on the Paired devices list.
Up to four devices (one headset only) can be paired with the telephone base.
To use a paired device, it must be connected and on the active devices list.
Once you have paired a device with the telephone base, you do not need to repeat the pairing
procedure
again unless you delete the device from the paired devices list.
Note: Only the first 15 characters of the device name are shown on the paired devices list.
Rename a paired device
You can change the name of a paired device on the paired devices list.
1. In standby mode, Press MENU/OK and choose Bluetooth
2. Select Paired devices ,
3. Select the device you want to rename
4. Select
Rename and Press MENU/OK
5. The screen displays ENTER NEW NAME .
6. Use the keypad to edit the name
7. Press
MENU/OK to confirm. The handset displays Device renamed .
Remove a paired device
If you want to add another Bluetooth device and you already have the maximum of four devices on
the paired devices list, you must first delete a device from the paired devices list.
1. In standby mode, Press MENU/OK and select Bluetooth
2. Select Paired devices ,
3. Select the device you want to remove
4. Select
Remove paired .
5. The screen displays Remove device from paired list? Press Menu/OK to confirm
6. The handset displays Device removed from paired list .
F. Active devices