Telefunken TF-SRP3469, Инструкция по эксплуатации, Страница: 5 / 18

5
Instruction manual
5
USB/SD operation
Playback
• Turn on the device
• Insert a USB device into the USB port or
SD card into the slot. The unit will switch to
USB/SD mode automatically and the USB/SD
icon will show in the top of the display. Or, if
afterwards you selected another mode, press
SOURCE button repeatedly to select USB
mode.
• Playback of the first track will start
automatically. The display will show PLAY icon
in the top and the number of the track.
• Press PLAY/PAUSE button to pause
playback. Press the button again to resume
playback. Press STOP button to stop
playback; PLAY icon will disappear and
the display will show the total number of
tracks.
• Press repeatedly TUNE- and TUNE+
buttons to go to previous or next track.
Press and hold TUNE- or TUNE+ buttons for
fast reverse or fast forward playback;
release the button for normal playback.
• Press the PLAY MODE
button once ("ONE" will be displayed),
the current track will be played repeatedly.
Press the button once again ("FOLD" will be
displayed), all tracks in the current folder will
be played repeatedly. Press the button once
again ("RAND" will be displayed), the unit will
randomly play all tracks. Press the button
once again ("ALL" will be displayed), the unit
will repeat all tracks on the device.
Press this button again to return to normal
playback (all messages will disappear from
the display).
General USB/SD notes
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (2.0 version)/SD cards up
to 32 GB.
• FAT and FAT32 file system is supported by
this unit.
• Press and hold the SOURCE button
to go to standby mode.
AUX
You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speakers of this unit.
• To connect an external audio device,
please use a standard audio cable with 3.5-
mm-to-3.5 mm plugs (not included) to connect
the headphone out or audio line-out of the
external device to the AUX input socket.
• Select the AUX mode using the
SOURCE button.
• Turn on the external device. You cannot
control playback with the buttons of this unit
except adjusting the volume.