Telefunken TF-SRP3461B, Инструкция по эксплуатации

Страница: 5 / 20

5
Instruction manual
5
General USB/SD notes
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
AUX jack
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speakers of this unit.
• To connect an external audio device, please
use a standard audio cable with 3.5-mm-to-3.5
mm plugs (not included) to connect the headphone
out or audio line-out of the external device to
the AUX input socket of this unit.
• Press FUNCTION button repeatedly to select
AUX mode; AUX icon will be displayed.
• Turn on the external device. You cannot control
playback with the buttons of this unit except
adjusting the volume.
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (2.0 version)/SD cards up
to 32 GB.
• FAT and FAT32 file system is supported by
this unit.
Bluetooth operation
Bluetooth wireless playback
• This unit can wirelessly playback audio
from any device with Bluetooth A2DP
function.
• The wireless range is approximately within
10 meters.
• Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO THIS
UNIT:
•
M
ake sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
• Switch on the unit and press the
FUNCTION button repeatedly until
the display shows BT.
• You will find the unit listed in the
Bluetooth connections list of your device (as
TF-SRP3461B).
• If asked for a passcode, enter “0000”
• The initial setup is required only once
per device.
• After a successful pairing, you can
control the playback of audio files as
described in the USB/SD operation section.