Telefunken TF-PS2201, Инструкция по эксплуатации

Страница: 4 / 16

4
Instruction manual
Utilization of the product
If you want to dispose this product, do not
mix it with general household waste. There is a
separate collection system for used electronic
products in accordance with legislation that
requires proper treatment, recovery and
recycling.
Please contact your local authorities for
the correct method of disposal. By doing so,
you will ensure that your disposed product
undergoes the necessary treatment, recovery
and recycling and thus prevent potential
negative effects on the environment and
human health.
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.
• Do not hit or drop the unit.
• Do not expose the unit to vibration, direct
sunlight, too high or low temperature or humidity.
• Do not disassemble the unit yourself.
Refer servicing to qualified service personnel.
General operations
Power on/off
Press and hold the POWER button to switch
the unit on. Press and hold it again to switch
the unit off.
Line input
You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speakers of this unit.
• To connect an external audio device,
please use a standard audio cable with 3.5-
to-3.5 mm plugs to connect the input terminal
LINE IN on the unit.
switch to the LINE IN mode. The display
screen will show "LINE".
• Turn on the external device. You cannot
control playback with the buttons of this unit
except adjusting the volume.
Volume control
Rotate the master volume knob to adjust the
general volume level of the unit.
You can also separately adjust the volume of
microphone (if connected) by rotating the
microphone volume knob.
Modes
Press the SOURCE button repeatedly to
select an operation mode: Bluetooth => LINE
=> USB => SD => TUNER. The USB and SD
modes are available only if an appropriate
storage device is plugged in.
Power supply
• The unit operates on an internal
rechargeable Li-ion battery.
• The battery can be recharged with
the provided AC power cord. Before first
plugging the appliance check that voltage
indicated on the rating label corresponds to
the mains voltage in your home.
• Insert the power cord into the
AC power input socket on the side of the unit.
• Plug the power cord into the wall outlet.
• Press and hold the POWER button to
switch on the unit.
• The percentage of battery charge will be
shown on the screen when you press the
POWER button shortly.
• For best results, try to fully charge the
battery before each use. If the battery is
drained, please allow it to recharge for a few
hours.
Checking the battery life
• This device is designed with a smart
battery check feature for your convenience.
• Press the battery level button to display
the current battery charge level while the unit
is not charging.
The charging indicator lines
will keep flashing during charging.
4 lines are lit ~ 100% full
3 lines are lit ~ 75% full
2 lines are lit ~ 50% full
1 line is lit ~ 25% full (charging is needed).
• Press the SOURCE button to